Controls the GrandMA2 Series with MIDI commands.
GrandMA has the facility to send Midi Show Control data via Ethernet. Use this product file to do this.
Protocol: LG Port Options: serial Baud: 9600 Bits: 8 Parity: n Stop Bits: 1 ethernet Port: 9761 Type: tcp_client…
SNMP messages to L-Acoustics LA4X amplifiers
Before using the ASCII protocol, you need to select it from the
machine’s front panel. Press the MENU button until you get to “set
communication protocol” and then choose the ASCII protocol. This is saved
in the non-volatile memory, so the machine will remain as ASCII even after
cycling power. To check that the protocol has been selected, and to confirm
that the communication is OK, send the" Connection Status" comnad to the VS-3232Vxl. It
should reply by sending back the string OK!!
KissBox IO UDP Protocol.
Protocol: Video Disk Communications Protocol (VDCP) Port Options: serial Baud: 38400 Bits: 8 Parity: odd Stop Bits: 1 ethernet…
Basic sending of SNMP messages – works ONLY with version 1.74 and later firmware
Transmitting appropriate numeric ASCII characters will simulate key presses on the RMT-4IR remote control.
Protocol: TIPM Port Options: serial Baud: 57600 Bits: 8 Parity: n Stop Bits: 1 Commands: Power On – Turns the…