TIPM
serial
Baud: 57600
Bits: 8
Parity: n
Stop Bits: 1
Power On – Turns the lamp and all electrical power on.
Power Off – Sets the projector to Standby Mode.
Power Status – Returns the Power Status of a projector to the PowerStat device variable.
Shutter Open – Opens the shutter.
Shutter Close – Closes the shutter.
Shutter Status – Returns the Shutter Status of a projector to the ShuterStat device variable.
Lamp Hours – Returns the Lamp Hours of a projector to the LampHoursStat device variable.
Get Temperature – Fills the TempStat variable with the Panel Driver Temperature.
Zoom – Set zoom of current channel to specified integer, and move to that position. Must have Intelligent Lens System (ILS) on to work.
Focus – Adjust the lens focus offset to a specific position. Must have Intelligent Lens System (ILS) on to work.
Error
PowerStat “Unknown”
ShutterStat “Unknown”
LampHoursStat “Unknown”
TempStat “0”
