--------------- A l c o r n --------------- M c B r i d e V16X --------------- Release Notes I n c . --------------- Install Instructions: 1) Use the menu in Winscript Live under Help-->Update Firmware to download and update the firmware. Alternate Install Instructions: 1) Copy the downloaded V16X_OS.NEW to the SD card. 2) Reset V16X by turning it off, and then on again. 3) Wait for Update to complete. You will see "Firmware Update Complete!" on the screen when finished. NOTE: When the update is complete, the V16X_OS.NEW file will be renamed to OS.SAV so that the update does not repeat when the hardware is powered-up again. If you want to use a single flash card to update multiple V16Xs, you can change the name of the V16X_OS.NEW file to FACTORY.NEW. The FACTORY.NEW file will perform an update just like V16X_OS.NEW, only it will not be renamed at the end of the update process. This means that after an update, you can remove the flash card from the product and insert it into another product to perform another update. NOTE: If your product is installed and working without any issues, we recommend that you do not update your software/firmware. 2018-12-12 Version 2.36 --------------------------------------------------- - Increased speed times for Store Variable and Restore 2018-12-03 Version 2.34 --------------------------------------------------- - Added Ping function - Added Keep Alives to TCP Connections - Fixed "TCPStatus" not updating (Note: Scripted outgoing messages still required for update of "TCPStatus" device variable) 2018-11-19 Version 2.33 --------------------------------------------------- - Added device variables for Controller Name, Script Name, and IP address information 2018-10-02 Version 2.31 --------------------------------------------------- - Fix for downloading of script files (when too fast reboot) - Temporary removal of DHCP - NTP loading setting from script correctly 2018-09-13 Version 2.30 --------------------------------------------------- - Increased realiability for sent/receive of script file 2018-09-10 Version 2.29 --------------------------------------------------- - Officially released version with PTP support