--------------- A l c o r n --------------- M c B r i d e Digital Audio Machine AM4 --------------- Release Notes I n c . --------------- Install Instructions: 1) Copy the OS.NEW file to the Compact Flash card. 2) Restart the AM4 by power cycle or remote command (XX). The LED will flash Green-Red-Orange while the update takes place. Once the LED goes out, the firmware update is complete. NOTE: If your product is installed and working without any issues, we recommend that you do not update your software/firmware. 2014-01-16 Version 4.63 --------------------------------------------------- - Fixed 8-bit wav - Fixed mono wav 2014-01-10 Version 4.62 --------------------------------------------------- - Fixed loading GPS playlists - Fixed background music in GPS playlists - Play Next command not supported in GPS playlists - GPS playlists Must use full file name (do not play by number) 2013-12-11 Version 4.61 --------------------------------------------------- - Fixed stop command (when looping playlist has missing audio files) - Fixed Latitude command for North/South setting - Fixed play subdirectory - Fixed play (during loop in playlist does not advance) 2013-12-11 Version 4.60 --------------------------------------------------- - Initial release of New AM4 firmware Note: some minor differences exist between the 3.XX firmware and the 4.XX firmware: - The format (FO) command is not supported. - The FAT16 filesystem is not supported. - DIP Switch 3 must be set to OFF as its function is undefined. - .RND playlists are not supported - use the new play directory command: to play all files in the root randomly: ?PD to play all files in a folder: "/folderName/"?PD to play all files sequential by number: "/folderName"#PD - The fade command (FD) only applies to announcements and is set in number of milliseconds - The play next command will store up to 3 files to play next 2012-07-12 Version 3.31 --------------------------------------------------- - Last revision of Legacy AM4 firmware