Transmitting appropriate numeric ASCII characters will simulate key presses on the RMT-4IR remote control.
Protocol:
RS232 Serial Control
Port Options:
serial
Baud: 19200
Bits: 8
Parity: n
Stop Bits: 1
Commands:
Enable Auto-Switching – The switcher will automatically switch to the last source device that was powered on.
Disable Auto-Switching – This command disables auto-switching.
Get System Status – Fills the CurrentInput and AutoSwitchingStatus device variables.
Get Firmware – Fills the CurrentFirmware device variable.
Input Select – Selects an input (1-4).
Variables
Error
CurrentInput
AutoSwitchingStatus “Unknown”
CurrentFirmware “Unknown”
