Description
RideAmp is a high-powered audio amplifier that is purpose-built for on-board applications like dark rides, coasters, trams, and parades.
At Alcorn McBride, we are dedicated to creating tools that enable attraction designers to completely immerse guests in the themed world that they have envisioned. When it comes to high-profile attractions, ride vehicles with on-board audio systems often play a key role in this vision.
RideAmp is the industry’s first high-powered audio amplifier that has been specifically designed for vehicles used in themed attractions. It provides 4-channels of amplification capable of delivering a formidable 350W of output power per channel. Want to breath a little extra life into those large subwoofers or bass transducers? Simply bridge outputs to achieve up to 700W of bone-crunching output power.
When combined with the incredible capabilities of RidePlayer, RideAmp delivers features never before seen in a vehicle amplifier. This includes Dante/AES67 network audio input for all-digital signal distribution, protecting your audio experience from the electrical noise introduced by the motors and actuators in the vehicle. This same connection also enables intelligent control and status monitoring, allowing you to report the health of the entire on-board audio system to maintenance staff without requiring direct access the vehicle.
RideAmp delivers the performance and quality of a professional amplifier from a compact and rugged package that’s tough enough to survive a coaster. Vibration-resistant design, efficient DC power input, locking gain knobs, rugged connectors, and flexible mounting options make this product ideal for even the toughest on-board audio applications.
Part Numbers
RIDEAMP-350Q
RideAmp – On-Board Audio Amplifier /w Dante/AES67 (4CH x 350W)
Control
Indicators
Power
Network – Link/Activity
Audio – Signal/Mute
Status – Amp OK, Protect, High Temp, Clipping
Switches
24V/48V DC Power Input
Network Control*
Amp Enable/Disable
Mute Enable/Disable
Network Monitoring*
Amp Status
Power Status
Clipping
*RidePlayer network audio connection is required
Audio
Speaker Outputs
4 x Speaker outputs (8-pin Molex)
48VDC – 4 x 350W @ 4 Ohms (bridgeable to 700W @ 8 Ohms)
24VDC – 4 x 250W @ 4 Ohms (bridgeable to 500W @ 8 Ohms)
Minimum Load
Standard – 2 Ohms
Bridged – 4 Ohms
Network Audio
4 Input AES67/Dante Interface (4×0)
100/1000 BaseT (2 x M12 X-Coded)
Internal switch to support daisy-chaining RideAmp units
Analog Inputs
4 x Balanced inputs (1 x 12-pin Molex)
10k Ohm Input Impedance
Gain Control
4 x Industrial-grade locking potentiometers
Frequency Response
3Hz – 45kHz
S/N Ratio
>113dB
THD+N
<0.005%
Physical
Size
10.6″L x 9.2″W x 4.4″H (270mm x 234mm x 112mm)
Weight
10.3 lbs (4.67 kg)
Power
20-52VDC
48VDC @ 18A
24VDC @ 36A
Fuses
2 x 20A/80V ATO-FKH Blade Fuses
Operating Temperature
0C (32F) to 38C (100F) 0-90% Relative Humidity
Mounting
Surface-Mount – Compatible with JL Audio MHD600/4 Mounts
Compliance
WEEE, RoHS
Documents
Mechanical
Connectors and Cables
RideAmp-350Q Development Kit – Includes 24V Power Supply and Full Set of Breakout Cables
RideAmp-350Q Connector Kit – Includes Full Set of Blank Molex Connectors and Pins
M12 X-Code Ethernet Cable – 2 Meters (6.5 ft)
M12 X-Code to RJ45 Male Ethernet Cable – 2 Meters (6.5 ft)
Parts
24VDC 20A DIN-Rail Power Supply