In an existing attraction, it sometimes seems like the ethernet cable
coming from your V16Pro is a magical mystical wire that controls all
of the equipment. When equipment is re-arranged or removed, this
sometimes leaves the person trying to debug the system scratching
their head and staring at this single wire.
Fortunately, WinScriptLive has some tools to help see what’s going on.
You can go online with the V16Pro and easily pull the script. Going to
the “devices” screen reveals information like IP addresses and type of
connection. You can see the messages going to and from the V16Pro by
going to the “Live Log”. To do this, click on the “Watch” button. Then
add the device’s name (by itself) to the “watch” list. All traffic for
this device will now be reported in the log. Of course, if the TCP
device isn’t there at all any more, you can see the connection status
by adding the device’s “TCPStatus” variable to the “Watch” list. This
will show information like “Connected” or “Waiting for Response.”
If the device is serial or MIDI, you can always see what message the
V16Pro is trying to send to the device, even if the device doesn’t
exist. But then, if it was serial or MIDI instead of ethernet, Jim
would be giving you a hug, and you probably wouldn’t need to read this
Editor’s note: Jim is our Director of Engineering and a strong believer in “keep it simple.” Jim is also our Director of Fun. Around the office you’ll find him sneaking around planning practical jokes on coworkers.