Introducing Warp & Blend for BinloopX

Reliable Technology

Projection would be simple if attractions were built out of flat, rectangular walls. Have you seen an attraction lately? Domes, cylinders, wrapped LED walls, and at least one pre-show room with a curved design inspired by the project’s architect.

Every one of those surfaces takes a nice rectangular video signal and asks it to be something it isn’t. Making that happen is called Warp & Blend, and it has been near the top of the BinloopX request list about as long as BinloopX has existed.

It took a while to get here, and the reason is the same one as always: we build everything ourselves.

You can’t download off-the-shelf warp software into our products. Not just because we’re stubborn (okay, partly because we’re stubborn), but because a BinloopX is built to shovel uncompressed video as fast as it can from storage out to your projectors and displays, and to keep doing it for decades without a software update screen appearing mid-show. Everything that touches those pixels, we wrote. So when the pixels have to bend, we have to bend them ourselves.

Warp & blend isn’t a new idea. Media servers have been doing it for years, on general-purpose computers with software stacks built for exactly this. Our architecture had to solve it differently. A BinloopX BX-4KU is a purpose-built media server: every bit of its hardware and software is designed in-house, and its one job is moving uncompressed video, flat out, for decades. Bending pixels inside that pipeline meant writing the bending ourselves, at full speed, with nothing off the shelf to borrow. Warping a still image is easy. Try doing it to uncompressed video in flight, on hardware designed never to pause for anything. That’s the part that took man-years.

Which turned out to mean: bending them in real time, without slowing the video down. Learning every projector manufacturer’s calibration language, because they all have their own maps and their own file formats. And then automating the whole thing, because projectors drift overnight and attractions want them recalibrated every morning before the gates open, with nobody touching anything.

We never expected this would be a small job. But it’s done now: Warp & Blend is available for BinloopX, built into WinScript Live.

If there’s already a BinloopX in your rack, good news: you already have this. It arrives with an update, not with a purchase order. Open WinScript Live and go forth warping pixels!

If you already live in the MPCDI world, copy your files to the BX-4KU and go. If you work from components, PFM meshes and PNG masks work too, straight from the device’s warp directory.

And if you’d rather build from scratch, WinScript gives you a visual workspace: a warp mesh you can grow from a simple 1 × 1 grid all the way to a dense 64 × 64, vertices every 8 pixels (every 16 at 4096 × 2160), smoothly interpolated in between, with Snap to Grid when you want it and Undo when you don’t.

Blend brings the edges together: independent width and brightness for each edge, in pixels or percent, with gamma to match your projector and smoothness to set how gradual the transition appears.

While you’re in Live Mode, connected to the actual BinloopX, you can grab a vertex, drag it, and watch the image on your real projector move the moment you let go. Blend widths, gamma, smoothness, masks: everything answers while you watch. Tuning a blend used to mean making a change, exporting, restarting, and walking to the projection room to see what happened. Now it means looking at the wall.

And when part of the picture just needs to not be there (there’s always a door, a set piece, or a mirror), mask takes care of it with clean, hard edges where blend’s gradients would be wrong.

Bring the projectors you want. What’s cool is none of this is welded to one manufacturer’s gear. Swap them out halfway through the attraction’s life if you like. We’ll talk to whatever you bring, and we’re happy to talk to whoever you buy them from.

If your surfaces are all flat, congratulations; enjoy the easy life. If they’re not: domes, cylinders, that curve the architect loved, tell us about it.

 Odd surfaces have a way of becoming our next feature.

Have you got something odd you need to do? Let us know what features you’d like to see! 

Want to learn more? Check out everything Warp & Blend has to offer here.